18 Lithic Way, Wangara WA 6065
Preparation of the area to be covered with your new artificial/synthetic grass is key to the successful installation. Ideally the area should be free of any organic matter prior to installation.
Remove any existing organic matter to a depth of 80mm ready to fill with 70mm blue metal dust (known as cracker dust, available from your local landscape supplier). For car parking areas, we recommend you dig out at least 110mm and fill up with at least 100mm blue metal dust (cracker dust). Prior to backfilling with cracker dust, we recommend you compact the area.
Tips
• Applying weed killer to the site and around the edges may reduce the likelihood of organic matter reappearing.
• Cap any sprinklers and test to ensure there are no water leaks.
Fill up the area with blue metal dust, apply some water then compact the area.
Tips
Leave the base
Lay the turf down and cut to an approximate size leaving about 50mm around the edge. If you are using joining tape put the joining tape under the turf to be joined., make the joint, put pins across the joints and edges.
Tips
Do not trap the turf blades under the pins
Spread kiln dried silica sand (this ensures the sand is free of any organic matter) on top the synthetic turf, brush against the pile with a hard brush or broom. Spread water on the turf to clean up the area.
Tips
You may want to use a blower blow the areas where extra silica sand has built up